|
|
MundorfMOX Resistor 10W |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Voltage rating 500V DC , Copper Lead
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Metal oxide layered ,
Supreme Silver Oil Capacitor
Mresist Supreme resistor |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
High power resistors are used in crossover networks to
adjust the levels of individual speaker units and they
are also used in oscillator circuits and equalisers.
Their basic job is to convert surplus or unwanted
electrical power into heat. One of the most important
specifications of a resistor is thus its power handling
capacity, which is expressed in watts.
Resistors' residual inductance is also relevant for tweeter circuits. Ordinary ceramic resistors consist of an insulator body cast around a wire winding. At very high frequencies this winding can behave like a coil, blocking the corresponding frequencies. Because of this we recommend using our metal oxide resistors for best performance and especially for tweeters. These components don't have any windings; instead, the resistance is made of a conductive metal oxide layer applied to a substrate. This design has virtually no inductance. Unlike ordinary wire resistors, metal oxide layer resistors have no residual inductance. This means that they should always be used for all applications calling for high transient rise times, such as midrange speakers and tweeters. Our metal oxide resistors have continuous power ratings 10 watts, but their peak capacity is much higher. Dimensions![]() Approximate Dimensions: L:50mm B:40mm D:8mm Specifications
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
STONES SOUND STUDIO
