| |
. |
JP3.0 ribbon tweeter is
a high-performance component which is probably the
best choice to building/upgrade your loudspeaker.
Feature
 |
Super strong Neodymium magnet fro high
efficiency |
|
|
Build-in impedance conversion
transformer |
|
|
Effective from 1,400Hz upwards due to
the large diaphragm area and low
self-resonance. |
|
|
Extremely thin diaphragm (0.009mm
Aluminum foil) guarantees a high degree of
signal fidelity and broad frequency
response. |
|
|
Low distortion factor, good
power-handling capabilities, high linear
impedance and amplitude frequency response
and the broad frequency response range.
|
|
|
Flat impedance from 1,000 to 40,000Hz
|
|
|
Specifications
|
| Ribbon
material |
Aluminum |
| Ribbon mass |
11mg |
| Ribbon
dimension |
8mmx66mmx0.009mm |
| Ribbon area |
528 square millimeters |
| Gap flux |
0.6 Tesla |
| Gap height |
3mm |
| Impedance |
7Ohm |
| DCR |
0.02 ohm |
| Sensitivity |
95dB/M/W |
| Frequency
response |
1,700~40,000Hz |
| Resonance
frequency |
220Hz |
| Power
handling |
14W Normal, 40W Max |
| Recommended
crossover frequency |
2,500Hz with –18dB |
 |
|
|
Fountek Electronics Co. STONES
SOUND STUDIO